Results 1 to 7 of 7
Thread: FFCP printing issue
Threaded View
-
01-17-2017, 04:06 PM #3
- Join Date
- Jan 2017
- Posts
- 9
I tried the makeprintable.com but it looks like they are off-line to come out of beta. The material is ABS with nozzle at 230 and bed at 110 C. I did the print via USB but tried a subsequent version off SD card with similar but not the same results. The print speed is 3600 mm/min. X/Y Axis movement 4200 mm/min and Z axis movement speed 1200 mm/min. Both of failures happen at similar Z axis height of about 1.7 - 2 inches in height. I have changed the overall height of the model by two inches and changed the slope of change in diameter. I am printing this third version from USB too.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help