Results 1 to 8 of 8
Threaded View
-
12-30-2016, 04:38 PM #7
- Join Date
- Dec 2016
- Location
- Idaho
- Posts
- 5
zsteps/mm was set to 398. Once I manually spun the dial all the way to 2560 it worked. Went all the way up like it should and traveled at the correct speed.
Last edited by DarthViking3DPrinting; 12-30-2016 at 10:24 PM.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion