Results 11 to 13 of 13
Thread: Layers not smooth
-
12-28-2016, 09:17 AM #11
-
12-28-2016, 01:54 PM #12
- Join Date
- Apr 2016
- Posts
- 120
Looks simple enough!
I have sliced it in S3D and will try a print tomorrow.
Herewith a basic GCODE that should suit your printer: http://sendanywhe.re/2W78CW No guarantees though!
-
12-29-2016, 05:28 AM #13
- Join Date
- Apr 2016
- Posts
- 120
Here's my first go at printing the object. The printer was sat @ -5 degrees C last night, so there is a little bit of warping going on!
https://drive.google.com/file/d/0B5F...ew?usp=sharing
https://drive.google.com/file/d/0B5F...ew?usp=sharing
Generally though, everything looks as I would expect. A little bit of wobble, but this is expected with these operating temps, as the printer is calibrated for room temperature and really struggles when it gets that cold!
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)