Results 1 to 8 of 8
Threaded View
-
12-28-2016, 10:53 PM #6
- Join Date
- Dec 2016
- Posts
- 43
Just an update: I was overheating because I thought my room was too cool and getting desperate. It turns out my printers z axis is "drifting" upwards on one side. I corrected it and re-leveled the bed and moved the nozzle closer to the bed as well (0.1mm) and now it runs perfect. Have to keep an eye on the "z" axis though after a few prints it seems to drift up about 2-3mm higher on max X side of the bed.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion