Results 1 to 8 of 8
Threaded View
-
12-23-2016, 07:40 PM #4
- Join Date
- Jun 2016
- Location
- Oklahoma
- Posts
- 904
Run at 60 for the first layer with some glue stick if needed and then you could drop the temp to 55 depending on the ambient room temp. 205 is an ok temp. I run 215 for first layer then drop to 205-200 or whatever works for that model etc.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion