Results 1 to 8 of 8
Threaded View
-
12-14-2016, 01:57 PM #3
- Join Date
- Dec 2016
- Posts
- 2
Cool. I am thinking of using something like this: https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 to fill in and seal the gouges. Should get everything back to right again hopefully. Will sand down the tips of the gouges to make sure nothing is sitting up.
Holes and pockmarks in print walls
Today, 09:14 AM in General 3D Printing Discussion