Quote Originally Posted by ex-egll View Post
Progress is being made!. Now using 1.10 RC7, pretty much everything is up and running and ready for fine tuning with one exception.

During ABL the head will move into position, servo drops down, probing is done (twice 1 fast 1 slow), head moves to next position BUT it does not raise the Z-Axis. As the servo si still down (as I believe it should be), the probe switch drags across the bed.

I have #define Z_PROBE_TRAVEL_HEIGHT 5 is there anything else that needs setting? I must admit I am going a little cross eyed reading through the config files.

Thanks
Hi

Switch over to RC-Bugfix. If you already have the configs for RC7, it should be a fairly quick change. There were a bunch of fixes for the BLTouch made about 10 days ago.

Bob