Results 1 to 10 of 14
Thread: Bismarck Scale Model 1:100
Threaded View
-
11-29-2016, 11:30 AM #8
- Join Date
- Oct 2016
- Posts
- 12
Hi All
I finally finished printing the hull.
It was quite a task, it took 24 pieces and around 220 hours of printing, all parts have been friction welded together, during the course I had 3 failed prints and have some issues with warping as you can see in the photo as there is a few gaps in the hull.
Good thing is putty will solve those issues.
If anyone has doubts that massive scale items can be printed out well at 251cm x 40cm x 12cm, I would say that's pretty big for a printer with a print capacity of around 20cm cubed. Overall I am pretty happy with the outcome of my hull, now onto to the horrible task of finishing the hull, sandpaper and filler here I come.
http://i103.photobucket.com/albums/m...pssa6l8xek.jpg
Cheers
Druid
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion