Results 1 to 10 of 4110
Thread: Qidi Tech 1 - Replicator 1 clone
Threaded View
-
11-20-2016, 10:29 AM #11
- Join Date
- Oct 2016
- Posts
- 7
I am looking for advise.
My printer seems to print on a angle.
Everything seems to lean at a angle to the left (X-) direction.
I did place the model on the bed but it still seems to print at a slight angle.
Using S3D.
Does not seem to make a difference using PLA or ABS.
The print I am running now looks like it is starting to lean back to the X + direction.
Glass bed is clamped tight so I know its not moving.
This print is PLA bed temp 60 Extruder temp is 200
Any help would be appreciated.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion