Results 1 to 10 of 10
Threaded View
-
11-09-2016, 07:06 PM #7
- Join Date
- Oct 2016
- Posts
- 19
From a net search "Check the hotend pushing the filament by hand. (245°C for ABS, 200°C for PLA) It should be as easy as inserting a knife into some butter.". Is that right? If so there must be a partial blockage in my hotend because its really difficult to push the filament thru.
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help