Results 1 to 10 of 10
Threaded View
-
11-08-2016, 05:47 AM #2
That looks a total mess i am afraid to say.
It is massively under extruding. Have you checked the extruder and the nozzle for a mechanical issue?
What hot end temp are you using?
I would also check that you have the correct steps/mm for the extruder.
Is this your first print? has it printed ok before, if so what has changed?
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help