Results 1 to 10 of 13
Thread: Filaprint bed surface
Threaded View
-
11-07-2016, 12:44 PM #10
The defaults are set like that for beginners who struggle getting prints to stick on the build plate.
The physical property I mean in this case is the glass transition temperature of ABS which happens to be 105°C. At this point ABS can be easily deformed by gravity. Your HBP should be no higher than 100°C.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion