Results 1 to 4 of 4
Threaded View
-
11-07-2016, 06:45 AM #3
I print PETG (TGlaze) the same as ABS - 240C, 30mm/sec, fan at 25% after layer 5. Comes out great.
I print PETG (TGlaze) the same as ABS - 240C, 30mm/sec, fan at 25% after layer 5. Comes out great.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help