Results 1 to 4 of 4
Thread: Prusa i3 surface cleaning
Threaded View
-
10-31-2016, 09:49 AM #4
if it's pla and not sticking - check your calibration. Pla generally sticks to everything if the calibration is tight enough.
Enclosed print volume totally unnecessary for pla.
If you can't get acetone, then rubbing alcohol will also work.
You could also try computer screen cleaning wipes. As long as it clears the grease and oils from people touching the bed, it should work :-)
Cura slicer issue
09-13-2024, 02:44 AM in 3D Printing Slicer Discussion