Results 1 to 10 of 35
Thread: Banding/Wobble/Layer Shift
Threaded View
-
10-18-2016, 09:55 AM #13
- Join Date
- Aug 2016
- Posts
- 29
Not that I know of. There is an extra cooling fan I have but It was there and on before this started giving me issues so I doubt its that.
Yes I cleaned and oiled all the rods.
Speaking with the manufacturer hes telling me to check the bed screws and the screws holding the z motor. Checked all screws and all were tight, although I was able to tighten the zmotor screws a couple more turns.
Told him that and hes saying he thinks its still a loose screw somewhere. Idk what else to check.
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help