Results 1 to 4 of 4
-
10-16-2016, 07:24 PM #1
- Join Date
- Oct 2016
- Posts
- 5
Turnigy fabrikator stops printing after a few layers
Hi,
I have had a turnigy fabrikator for almost a year now. sometime back the original extruder stopped heating up and I ordered a new one. I got that all set up but I still have a problem. I will hit print on a file from the sd card and it will start. after about 7 min the print will just stop-the screen will briefly show led blocks like it just turned on and then it will go back to sd card inserted. Everything stops moving and it cools down. I have already reinstalled firmware, put a new arduino board in, tried a different sli3er, and printed using a usb cable. I think that when it gets to a certain point in the print it pulls a loose wire and for a split second comes unplugged, resetting the printer and forgetting the print. Has anyone heard of this before? Any help would be great.
Thanks,
Will
-
10-16-2016, 08:15 PM #2
- Join Date
- Oct 2016
- Posts
- 5
nervermind I fixed it
-
10-16-2016, 09:13 PM #3
At least say what you discovered and how you fixed it. That would be of some value so people can search and find answers.
-
10-18-2016, 02:06 AM #4
Hi WILL_STEF,
I am glad that you fixed this issue. Are you able to explain how you managed this?
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help