Results 1 to 10 of 35
Thread: Banding/Wobble/Layer Shift
Threaded View
-
10-17-2016, 03:54 PM #4
- Join Date
- Aug 2016
- Posts
- 29
Simplify 3D
2mm layer height, 205c, 60c bed temp, 2800mm/min speed
Doing it for another part now too that I'm printing at 1800mm/min
I haven't changed the files or settings at all and the parts use to come out fine. So it has to be a mechanical thing. Using the same x3g file I used a couple weeks ago.
I checked the screws on the carriage and the screws holding the bed to the platform and all are tight.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help