Results 1 to 10 of 4110
Thread: Qidi Tech 1 - Replicator 1 clone
Threaded View
-
10-16-2016, 01:37 PM #11
- Join Date
- Jun 2016
- Location
- Oklahoma
- Posts
- 904
Because the printer uses X3G not G-Code. The steps are done during code generation. To change the default steps you would need to create a custom X3G profile. From reading this is a pain and should not be necessary.
I kept thinking I needed to redo the extruder steps but everything says no for Sailfish printers.
What keeps getting stressed is filament diameter.
If you are changing the multiplier that much something else is up. This could be things like the gear in the extruder has been changed to a different one. It is slipping thus throwing off the rate. Wrong size nozzle set.
Could be not hot enough for print speed.
Others can for sure comment much better.
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)