Results 1 to 4 of 4
-
10-13-2016, 08:11 PM #1
- Join Date
- Oct 2016
- Posts
- 2
New QIDI dual extruder owner and i love it!
Coming from a wanhao duplicator i3 and now to this im in a totally differnt work this thing prints great!!! Besides the build take holding prints on harder than concrete(glassbed is on the way) My one question is this when printing it seem my first layer is a little melted looking and just a little "smushed" down but every other layer after that is perfect. what could be causing this?
-
10-15-2016, 08:54 PM #2
-
10-15-2016, 10:39 PM #3
- Join Date
- Oct 2016
- Posts
- 2
I've been using a sheet of printer paper just like I did on the wanhao. I feel I might have it just a little to close but the prints are coming out amazing now that I've bought simplify3d. Just that firs layer seems to be a little thixk. No bed digging or gouging just a little thick looking.
-
10-16-2016, 02:11 AM #4
I got a bed leveling sheet from QIDI when I got some parts. It's just a bit thicker than a piece of paper. Might try just a tad looser with the paper.
Editor in Chief
Bitsonline
Tips Appreciated But Not Expected
BTC: 16wxHvKd3oU6SVjv6FrenqhkvRmc8t7sPy
DASH: XqyaWxH896j9YeV1M35Gzb5gmRPmPbNDGq
Printing time- Is this right?
09-13-2024, 07:51 AM in General 3D Printing Discussion