Originally Posted by fontseeker Do you suggest to set them both to 0? 220 and 80 as an temperature of the extruder and HBP? I might research the settings a bit. It seems one may be telling it to start the supports a little to high for the first layer. I run my bed at 65 for the first couple layers then to 60 and that is with a glass bed. As for extruding I run from 190 to 210 or so.
View Tag Cloud
Forum Rules
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion