Results 1 to 3 of 3
Threaded View
-
09-18-2016, 08:18 AM #1
- Join Date
- Sep 2016
- Location
- Denmark
- Posts
- 1
12v 280w heated bed wiring Ramps 1.4/ Arduino 2560
Hi!
I just purchased a 12v 280w silicone heated bed.
My challenge is how to wire it properly so i don't frie my Ramps 1.4/ Arduino 2560.
I have a 500w 30amp 12v power supply, and according to my calculations it produces enough watts and amps to power the heated bed and all the other electronics, but i am worried that my Ramps 1.4 gets fried if i pull 280w directly trough the ramps board to the heated bed.
Does anyone know if the Ramps 1.4 can handle that amount of watts or if i need a DC to DC SSR so the power doesn't go trough the ramps board?
Design not printing solid
09-17-2024, 06:12 AM in 3D Modeling, Design, Scanners