Results 1 to 5 of 5
Thread: FLSUN i3 DIY kit
Threaded View
-
09-08-2016, 11:00 AM #1
- Join Date
- Sep 2016
- Location
- Barcelona
- Posts
- 5
FLSUN i3 DIY kit
I'm new in 3d printing. I start with this printer:
http://www.flsun3dprinter.com/index.php?route=product/product&product_id=51
This is a very cheap printer, that include all the required basic parts.
First of all, the manual is not the best. You have to pay attention and think about how it should work. For example:
PROBLEM 1:
The X axis belt tensor, is not properly explained. Because the screw must be free movement, I solved with hot metal to increase the hole.
PROBLEM 2:
The unilateral bearing is not moving free at the closest position, I solved again with a hot metal to edit the support piece.
PROBLEM 3:
The X axis is not firm because the Smooth pole is not properly fixed and it's moving (see picture). I am waiting for manufacture answer.
Onthe other hand, there are included several extra screw (I hope...). So you can print some extra piece and use these screw.
EXTRA PIECE:
Kossel_Filament_Spool_Holder_2020
http://www.thingiverse.com/thing:209294
FLSUN Kossel Delta Power Supply Mount
http://www.thingiverse.com/thing:1532391
Solid and Smooth 1kg or 5lb reel holder (Ionly use thi filament guide and the cleaner idea).
http://www.thingiverse.com/thing:374368
Finally here a current picture:
Do you have it? Share your information about it (configuration, problem, solution, improvements...).
Thanks!
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help