Results 1 to 10 of 12
Threaded View
-
07-31-2016, 08:43 PM #11
- Join Date
- Jul 2016
- Posts
- 43
So I took the y-axis motor out and took the pulley off of it multiple times - it didn't look bad but I found an aluminum GT2 20Teeth pulley that I replaced it with and it fixed the odd jitters. After looking much closer at the removed pulley it looks like there is a TINY fracture in it that changes the size of one of the valleys and it was just enough to cause issues. This was annoying.
Thank you all for your help.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion