Quote Originally Posted by wirlybird View Post
What are you guys using for extrusion width and multiplier for ABS and PLA? I think I am having sizing issues. I have the nozzle diameter set at .4.

How have you calibrated the print size?
I'm usually at about .9 on extrusion multiplier at a .4 extrusion width. If you increase width to .48 or so you can raise the multiplier some, maybe to .94 or so. Really it is trial and error, looking at the layer quality, and measuring results.

Sometimes to get the tool paths that I want I go all the way down to .3 width with a .4 nozzle. When you do this you have to decrease the multiplier more. I start at about .8 when I do this for multiplier and usually end up lower than that.