Results 1 to 10 of 72
Threaded View
-
03-14-2014, 03:06 AM #11
- Join Date
- Oct 2013
- Posts
- 219
Rylan , forgot to say, for the double coil design, you need to use a relay for output, with one coil across the N/O contacts and the other across the N/C contacts.
Last edited by mike_biddell; 03-14-2014 at 03:43 AM.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion