Subscribe to Our Newsletter Advertise
Close



Results 1 to 10 of 4110

Threaded View

  1. 05-19-2016, 02:06 PM #11
    SteveW25561
    SteveW25561 is offline
    Student
    Join Date
    May 2016
    Posts
    10
    I just got my printer and I'm happy to report I also got the 10mm Z axis rods. Ordered via alibabba direct and arrived in Canada quickly. I chose to deliver from China to ensure I got the latest. It looks great and I'm impressed my first ever 3D prints using the included PLA came out quite clean! I started with the filament support bracket for the back of the printer and was surprised it worked so well. I used a nozzle temp of 195C and bed temp of 60C on blue painters tape.

    Interested in the vref adjustments: do you just set them once and they are remembered by the printer? I'm using Simplify3D so don't know if it can be done from that. If I use RepG is it able to just set the parameter in the printer's nonvolatile RAM then I use Simplify3D and SD card to print future files?
    Last edited by SteveW25561; 05-19-2016 at 02:13 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules