Results 1 to 8 of 8
Thread: Why is my print skewed?
Threaded View
-
05-05-2016, 04:34 PM #1
- Join Date
- May 2016
- Location
- Texas, USA
- Posts
- 9
Why is my print skewed?
I have a Prusa I3 M201 front Geeetech.
This is supposed to be the first 35 layers of a box with straight sides, but as you can see the box is skewed. Can anyone tell me what caused this. It is leaning in the X direction. I have printed other boxes that were perfectly sized and shaped. This was printed with pla at 225 on a cold glass plate.
The printer was a kit and is new. This is only the 3rd or 4th print I've tried. The feed mech was tricky was get working.
angle.jpg
side.jpgLast edited by DennisH.; 05-05-2016 at 04:39 PM.
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery