Results 1 to 10 of 19
Threaded View
-
05-04-2016, 08:36 AM #11
- Join Date
- May 2016
- Posts
- 7
That is the point of this thread...
Like I noted in an earlier post,
It looks like 3Dsystems makes a producte that when post-cured and heat treated can achieve a Heat Deflection Temp (HDT) of 513°F (267°C)
http://www.3dsystems.com/sites/www.3...uestone_US.pdf
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help