Results 1 to 5 of 5
Thread: Help
Threaded View
-
05-03-2016, 04:43 PM #1
- Join Date
- Apr 2016
- Posts
- 12
Help - unable to get firmware right
I have bought this printer:
http://www.aliexpress.com/item/The-7...615774050.html
I was trying to uprade the printer to auto level, asked the seller for a new firmware that suported autolevel he as sent me this:
https://www.dropbox.com/s/ynr1og1xkm...DCKey.zip?dl=0
Due to a problem whit the usb chip i could not upload the firmware, so i decided to have replaced the melzi with a ramps kit
(Ramps 1.4 Kit + Mega 2560 r3 + 5x a4988 + LCD 2004 Display)
Needless to say that i don't know much (to sai the least) about programing.
Now i have received the ramps 1.4 board.
Made all the conections, and it seams ok.
But i can't managed to get the firmware right, downloaded and tried to made the changes of the board.
Can someone please send me the firmware to upload to rampsLast edited by Chaparro1973; 05-04-2016 at 03:31 AM. Reason: Bad links
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion