Results 1 to 10 of 29
Thread: ABS Not Sticking to Bed
Threaded View
-
04-26-2016, 08:56 AM #11
- Join Date
- Feb 2016
- Posts
- 68
Thanks for the info that ABS being difficult to use. I'll persist just for a bit longer with the ABS.
It seemed to stick all right on the bare Kapton when I increased the Flow to 110% and reduced the Speed to 75% but will try 100% Speed and 110% Flow.
I just put some diluted PVA on the Kapton and it is a bit sticky so hopefully it will be good.
The head really needed cleaning out but it is a bit late tonight to get started so will try tomorrow night.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help