Results 1 to 10 of 29
Thread: ABS Not Sticking to Bed
Threaded View
-
04-23-2016, 07:10 AM #1
- Join Date
- Feb 2016
- Posts
- 68
ABS Not Sticking to Bed
I got some Kapton Tape and the ABS temperature is 245 degrees and 90 degrees on my Cocoon Printer (Wanhao Duplicator i3) http://www.hobbyking.com/hobbyking/store/__85007__Kapton_Heat_Resistant_Tape_Roll_For_3D_Pr inter_Hot_Plates_230mm_x_33m_.html
I just printed the following orange skirt for the quadcopter but only got 2.7mm/.11inch and the ABS curled up at the ends and came unstuck.
http://www.thingiverse.com/thing:1223867
I have printed it in PLA and it worked great.
Anyone know what I am doing wrong?
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help