Results 1 to 10 of 4110
Thread: Qidi Tech 1 - Replicator 1 clone
Threaded View
-
04-16-2016, 05:03 PM #11
Really it is best to remove the left stepper and extruder right off the bat. I generally print at 80mm/s with one extruder and travel at 120mm/s or so. Even 1 extruder sags a little, but doesn't seem to affect final product much. For critical parts print on the far right or far left of the print bed, that is where the gantry has the most support to avoid ringing.
Holes and pockmarks in print walls
Yesterday, 09:14 AM in General 3D Printing Discussion