Results 1 to 4 of 4
Threaded View
-
04-06-2016, 11:42 PM #1
- Join Date
- Jan 2015
- Posts
- 445
New Gcreate Printer... first print Lines
Just got my new Gmax 1.5xt+ so naturally I wanna get it going quickly.
IMG_2853.jpg
So my first print after working on the ABL etc was this tower in the picture.
16 layer lines, 508 total layers.. super repeatable.
Need to figure out why this is happening any help is appreciated.
when you scrape a fingernail across the part, they are protruded slightly, you can feel them.
normal settings in S3D
.2 layer height
150% first layer
205c
blue PLA
60mm/s
any help would be greatly appreciated.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion