Results 1 to 3 of 3
Threaded View
-
04-03-2016, 09:26 PM #1
- Join Date
- Apr 2016
- Posts
- 2
ZBrush to Meshmaker to FFM Printer
Hi Folks.
This is my first post and I am still very new to 3D Printing.
Previously I have been sculpting using clays, making moulds, and pouring resin in to them to create small items. Nothing larger than a hand, and rarely smaller than a little finger tip.
Technology etc has pushed me to get a small FFM printer (Afinibot A9). At the moment I cannot afford a FDM one.
I am looking at using ZBrush to sculpt my items in and have 4R7 so I can output a STL file directly. From what I have read it looks like the output polygon density will be pretty high since most prints I have seen have been done on the UV Resin system.
Has anyone here done the same but used a FFM printer. I am very interested in any hints and tips you can provide. I have mention of using Meshmaker on the outputted STL to hollow out the model to same material.
Many many thanks
Dave a.k.a. Marcwolf
Printed Model of Motor Cooling Fan...
Yesterday, 02:07 PM in General 3D Printing Discussion