Results 1 to 8 of 8
Threaded View
-
03-24-2016, 07:39 AM #5
I read some time back to use thermal paste (like you use for your CPU) and thread the nozzle on with that, as you don't want to use thread lock, but I found it actually worked, obviously the thermal paste likes the high temperature, and it eventually cakes itself and seals any seams so you don't get that dribble back up around the nozzle neck.
Glass beds do have the flat advantage I'll give them that, I'm yet to get a perfectly flat aluminum bed on any printer.Hex3D - 3D Printing and Design http://www.hex3d.com
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion