Results 1 to 4 of 4
Thread: Taz 5 problems
Threaded View
-
03-14-2016, 12:35 PM #1
Taz 5 problems
New Taz 5 produces major banding, it seems to get worse as the print get taller. I have seen some clean start 10-20mms up but then the banding starts. I have used 3 different filaments, same results in each. What do you guys think?
20160311_131408.jpg20160311_201523.jpg
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion