Results 1 to 3 of 3
Threaded View
-
03-01-2016, 01:55 PM #1
online tool to design 3D printed flash drives
Hi everyone,
In 2015 September we made a website, where visitors can customize their own 3D printed flash drive case/ key ring and then they can order it.
A few days ago we launched a page for the ones, who have 3D printers. They can download stl files for 5 EUR, but we want to make a free kick off for those who really want to try this stuff.
Use the coupon code 3dprint to try as many print as you want for 1 EUR only!
Contact me here if you need help. Visit http://customflashdrive.co.uk/3d-print-your-own/
halom1.jpg
I recommend the following cura settings:
layer height / resolution: 0.2 mm
wall thickness: 0.8 mm
infill: 15%
no support is needed
combing enabledLast edited by Emese; 02-28-2017 at 03:34 AM. Reason: expired domain
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion