Subscribe to Our Newsletter Advertise
Close



Results 1 to 10 of 4110

Threaded View

  1. 02-29-2016, 06:22 PM #10
    cjalas
    cjalas is offline
    Technician
    Join Date
    May 2014
    Posts
    67
    Remove the blue stuff, get a borosilicate glass plate to use on top of the aluminum. Get Elmer's glue sticks (non toxic purple kind)

    For heating through glass, I run:

    PLA @ 210 First layer, 205c after / Bed @ 85c First Layer, 60c after

    ABS @ 230 / Bed @ 100c


    To get rid of spiderwebs / stringing between printed pieces and holes, etc, you need to enable Retraction in your slicer software.
    Last edited by cjalas; 02-29-2016 at 06:37 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules