Quote Originally Posted by rcleav View Post
I use glass but have never stripped out the leveling screws.
How much do you crank down on the screws to level the plate?
I have between 1/2" to 5/8" of a inch between the bottom of the build plate and the support arms.
Since I've never seen a maghold in person does it add any height in thickness over the stock build plate?
The maghold replaces the entire building plate. It doesn't take away from the build volume, if anything it might take 1/32" off. I also have about 1/2" between the build plate and the support arm. I think that during the installation of the new plate some of the thread on the screws rubbed off against the arm and made it hard to use the wing nut.