Results 1 to 3 of 3
Thread: Initial test line is wavy
Threaded View
-
02-19-2016, 09:34 PM #3
- Join Date
- May 2014
- Posts
- 67
I second what GammaRays says. I was having the exact same issue with my prints, and I had to get my bed closer (or the extruders closer to the bed). When they say to use a sheet of paper where it "barely fits through", they really mean BARELY. That paper thinness has to be very exact, almost having the extruder touching the bed.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion