Results 1 to 6 of 6
Threaded View
-
02-18-2016, 06:03 PM #2
I dug around for a while and the only thing I found is this:
http://rigidtalk.com/wiki/images/thu...4schematic.png
I'd just toss a cap in to stabilize the D9 12v.
I dug around for a while and the only thing I found is this:
http://rigidtalk.com/wiki/images/thu...4schematic.png
I'd just toss a cap in to stabilize the D9 12v.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion