Hi guys so i just got a cocoon create 3d printer witch is a wanhao knockoff and everything was going fine with the set up until i accidentally changed the wrong setting during the print bed leveling and changed the position on the y axis/print bed instead of raising the extruder to gain access to the bed and now every time i hit the home position it seems to want to go back further than it should and starts making a load noise for 10 seconds or so. I have uploaded a video so you can get an idea of whats going on https://sendvid.com/hq2vb9m7

Just on a side note i did try to adjust the y axis but it just has its default setting of 0.0mm on the LCD. I though once i hit the home button it would have just went back to default setting but it didn't.