Results 1 to 3 of 3
Threaded View
-
02-15-2016, 10:34 AM #3
- Join Date
- Nov 2014
- Location
- New Orleans
- Posts
- 50
In my experience it is easier to find flexible filament in 1.75mm. I only have experience with 1.75mm filament, so I cannot comment on how easy it is with 3mm vs 1.75mm.
You can find the STL files on clough42's website or on thingiverse, and you should order the hot ends that match your power supply. If you are using a 12v power supply, get 12v hot ends (the only difference is the heater cartridge), if you have a 24v power supply, get the 24v hot ends. A 24v power supply will heat the bed and hot ends quicker, but make sure your board will allow 24v before you buy a 24v power supply.
Printer will print perfect...
Yesterday, 10:44 AM in Tips, Tricks and Tech Help