Results 1 to 10 of 13
Thread: Help!!!!!!!!!!
Threaded View
-
02-08-2016, 05:52 PM #9
- Join Date
- Feb 2016
- Posts
- 7
IMG_0826.jpg The printer is pushing the extruder down into the layed plastic. So I figured raise the layer height. I stressed it a 1mm and that didn't seem to do anything. Then I thought, now I will change the extrusion speed. So I lowered it to 85% and that didn't do anything. I ended up lowering it down to 50% and that still didn't fix it.
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion