Results 1 to 10 of 757
Threaded View
-
02-01-2016, 08:14 AM #13
- Join Date
- Jan 2016
- Posts
- 6
I tried to make the bed very leveled, in hope that the correctional matrix wont bring the nozzle too high on the left side. However that had no affect on the result.
From the topology, I do see the bump along column 3 and 4.
Doing a 2x2 probing would skip that bump, but nozzle still goes too high on the left side.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help