Results 1 to 5 of 5
Thread: Z Axis Offset
Threaded View
-
01-30-2016, 08:37 AM #1
- Join Date
- Jan 2016
- Posts
- 7
Z Axis Offset
Hi,
somehow my Z Axis is in the correct height at bed leveling, but when I start my print, there is an almost 1mm gap...
Do I have to change the Offset to the positive or negative.
I don't really see a difference by making these changes.
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion