Results 1 to 8 of 8
Threaded View
-
01-10-2016, 01:12 PM #5
Right, That wouldn't fix the "problem" as you describe it. Most likely this was a first generation issue, and is no longer a problem. The fans were added for better PLA printing. The printer does fine with temps with the fans turned off, usually done for ABS printing. Again, no longer a problem and not worth mentioning any more. That statement you posted should stop being used.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion