Results 1 to 8 of 8
Thread: Circular hole coming out oval
Threaded View
-
12-26-2015, 09:33 AM #1
- Join Date
- Dec 2015
- Posts
- 80
Circular hole coming out oval - SOLVED
New to 3D printing and have bought a CTC Makerbot dual clone.
First thing I have done to upgrade the printer is a larger print bed, by printing extenders.
But as you can see the holes have come out a little distorted and are more oval than circular.
Any ideas on how to fix?
Thanks
Used Makerware software to export file.
Printed on masking tape, was a little adhesion problems where the corners came off a little.
But this hole is in the middle of the print which stayed on the bed well.
Used ABS filament, bed at 100-110
Extruders at 260
20151225_150319.jpgLast edited by bigo93; 01-19-2016 at 07:43 PM.
Printer will print perfect...
Today, 09:40 AM in Tips, Tricks and Tech Help