Results 1 to 7 of 7
Thread: Top Layer holes
Threaded View
-
12-16-2015, 06:54 AM #1
- Join Date
- Dec 2014
- Location
- Canada
- Posts
- 498
Top Layer holes
Having an issue with some prints im doing with PET
my top layer is showing large gaps.
running a 15% infill here. perhaps thats the problem.
.4mm nozzle
2.85mm filament
60mm/sec
.2 layers
3 top layers
230 degree temp hotend
80 degree heated bed with PEI20151216_075552.jpg
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion