Results 1 to 10 of 12
Thread: Any tips in Bridging with PETG?
Threaded View
-
12-11-2015, 10:19 AM #1
- Join Date
- Jan 2015
- Posts
- 62
Any tips in Bridging with PETG?
Hello,
Trying to bridge PETG Inland. The Bridge is maybe .6" long. All I can get is a lot of sagging.
Printing at 235 extruder and 80 bed. Using Simplify 3d and my bridging settings are
Unsupported area threshold =10
extra inflation distance = 1
Bridging extrusion multiplier 140%
Bridging speed multiplier 80%
Thanks for any tips, ask if you need more info.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help